How to Fix HP Envy wireless Printer Offline Issue in Windows 10?

HP Envy Printers – Printer is Offline (Windows)

This Step is for all HP Envy printers and PCs with Windows.

A status message of disconnected or HP Envy printer Offline shows on the PC, and the printer does not print.

Figure : Examples of printer disconnected status messages

Instances of printer Offline status messages

Stage 1: Use HP Envy Offline apparatus to check network

In the event that you have Windows 10 or 8, download a unique rendition of HP Envy remote Printer disconnected device explicitly made to help with printer disconnected conditions. Jump to the following stage if your PC does not have Windows 10 or 8.

·         Download HP Print and Scan Doctor.

·         Run HPPSdr.exe from the download area on your PC.

·         When HP Envy printer disconnected apparatus opens, click Start, and after that select your printer.

·         On the off chance that your printer in not in the rundown, turn it now and again, and after that snap Retry.

·         Next if there is an association issue, adhere to the guidelines in HP Envy Printer Offline apparatus.

·         In the event that a screen showcases inciting to turn on printer refreshes, click Yes and proceed.

·         On the off chance that a screen presentations inciting to make your printer the default printer, click Yes and proceed.

·         In Case the printer goes disconnected once more, at that point proceed to the following stage.

Stage 2: Reset the print condition

·         Resetting your printing condition can reestablish the association with the printer and the gadget yo are printing from.

·         Turn the printer off, hold up around 10 seconds, and afterward disengage the printer power line from the printer.

·         Mood killer the PC or gadget that you are attempting to print from.

·         Associate the printer power Cable to the printer, and afterward turn on the printer on the off chance that it doesn't consequently control on.

·         In case your printer uses a remote affiliation, restart the switch.

·         Separate the power Cable from your remote switch.

NOTE:

Network access is hindered while the switch isn't in administration.

·         Hold up 10 seconds, and after that reconnect the power Cable to the switch.

·         Sit tight for the switch's system movement light to end up dynamic.

·         Press the remote catch or remote control board symbol on the printer to kill the remote association, and afterward on.

·         Sit tight for the printer to reconnect to your switch.

·         Turn on the PC.

·         Reconnect the power line to the back of the printer.

·         Attempt to print.

·         On the off chance that you can print, you are finished.

·         On the off chance that the printer can't print and remains disconnected, proceed.

Stage 3: Set the default printer

• The default print driver may have transformed from the driver you introduced to another driver, for example, a Web Services for Devices (WSD) driver with a fundamentally the same as name. Change the default print driver to your initially introduced driver and affirm the printer isn't set for disconnected use.
• Quest Windows for gadgets, and after that snap Devices and Printers from the rundown of results.
• Right-click the name of the HP printer that is dynamic (not turned gray out), and after that select Set as Default printer.
• Changing the dim symbol to the shading symbol to be the default printer
• Attempt to print. 
• In the event that you can print, you are finished. 
• On the off chance that the printer can't print and remains disconnected or goes disconnected irregularly, proceed to the subsequent stage.

If you are still facing issue with your HP wireless printer You can call us on 1-877-364-5922.You can also visit us - www.printers-setup.us